Forums Latest Auctions Members
  1. Maurice

    Maurice Aug 12, 2021

    Posts
    4
    Likes
    2
    Hi all,

    i have a https://www.tagheuer.com/nl/en/smar...tag-heuer-connected/45-mm/SBG8A11.BT6220.html
    with blue and orange strap.

    Changing the straps is very easy with the click system for these straps, but since I am a little bit addicted to match my strap with what I am wearing I also want to use more straps.

    Does anybody has experience with removal of the original spring bar?
    Is this an easy thing to do, or should I not try this at all?
    Is there a step by step manual available for this?

    Looking forward to your responses.
    Thanks!!
     
  2. Anthony.R

    Anthony.R Aug 12, 2021

    Posts
    867
    Likes
    2,021
    Hi
    Yes it's quite easy to snap the existing fixed spring bar and the replace it with any 22mm strap wit its own spring bar.
    I would just make sure it's a good quality replacement.

    Good luck.
     
  3. Maurice

    Maurice Aug 12, 2021

    Posts
    4
    Likes
    2
    Good to hear that this can be done without issues.
    Thank you for your response
     
    Anthony.R likes this.
  4. Maurice

    Maurice Aug 26, 2021

    Posts
    4
    Likes
    2
    I have tried to remove the pushpin and have used several push pin removal tools, but the push pin is not coming loose.

    Anyone any suggestions?
     
  5. Anthony.R

    Anthony.R Aug 28, 2021

    Posts
    867
    Likes
    2,021
    You can't remove it...you must snap it in half with pliers. Then you can replace it with any 22mm springbar and add and remove with your tool.
     
  6. Maurice

    Maurice Aug 28, 2021

    Posts
    4
    Likes
    2
    Ok, clear!
    I was hoping that I could reuse the original pushpins.

    Thank you for the clarification.
     
    Anthony.R likes this.